|
|
 Ster-L-Ray™
Ultraviolet Germicidal Lamp |
 |
|
Ster-L-Ray™
Hi-Output Ultraviolet
Germicidal Lamps
 |
High Output (HO) germicidal lamps yield 1/3 to 2/3 more UV
output than standard lamps of the same length.
Ballasting is available in 120v and 220v. These HO lamps
are designed to operate with standard preheat ballasts,
which are significantly lower in cost and size than
traditional Slimline (Instant Start) ballasts. Custom
designed lengths can also be supplied.
The unique single-ended design is suited for test
tube-shaped quartz sleeve application. The end of the
lamp with the pins is positioned at the open end of the
sleeve at the top.
This reduces electrical problems associated with
condensation at the bottom of vertical units. Electrical
continuity is accomplished through the use of two
external Teflon coated wires. Longer lengths employ
spacing rings. The 4-pin single ended design permits the
use of standard Steadfast sockets. The lamps are
supplied with ceramic bases, which are resistant to UV
and ozone. They will not burn or deteriorate, and they
eliminate quartz sleeve fogging.
|
Lamp Models
|
Mechanical Characteristic |
Typical Operating Conditions
|
|
Base Face Length |
Arc
Length |
|
Inches |
mm
|
Inches
|
mm
|
Lamp
Watts
W 1 |
Lamp
Current
mA |
Lamp
Voltage
V@60Hz |
UV
Output
W |
Output @ 1M uv/cm2 |
05-0331
GPH436T5L
/HO/4PSE |
17.2 |
436.0 |
14.2 |
360 |
40 |
610 |
86 |
8 |
75 |
05-0332
GPH436T5
/VH/HO/4PSE |
17.2 |
436.0 |
14.2 |
360 |
40 |
610 |
86 |
8 |
75 |
05-0264
GHO36T5
/L/4PSE |
33.2 |
842.4 |
28.0 |
710 |
84-105 |
800-1000 |
120 |
27-34 |
250-280 |
05-0265
GHO36T5
/VH/4PSE |
33.2 |
842.4 |
28.0 |
710 |
84-105 |
800-1000 |
120
|
27-34 |
250-280 |
05-0333
GPH846T5
/L/HO/4PSE |
33.3 |
846.0 |
30.2 |
767 |
65 |
775 |
110 |
18 |
165 |
05-0334
GPH846T5
/VH/HO/4PSE |
33.3 |
846.0 |
30.2 |
767 |
65 |
775 |
110 |
18 |
165 |
05-0335
GPH893T5
/L/HO/4PSE |
35.2 |
893.0 |
32.1 |
815 |
65 |
750 |
114 |
19 |
170 |
05-0336
GPH893T5
/VH/HO/4PSE |
35.2 |
893.0 |
32.1 |
815 |
65 |
750 |
114 |
19 |
170 |
05-0337
GHO64T5
/L/4PSE |
61.2 |
1553.6 |
55.9 |
1421 |
155-193 |
800-1000 |
220 |
45-58 |
380-486 |
05-0338
GHO64T5VH
/4PSE |
61.2 |
1553.6 |
55.9 |
1421 |
155-193 |
800-1000 |
220 |
45-58 |
380-486 |
1 At line
frequencies (50 or 60Hz) the lamp wattage is not simply
the product of the lamp voltages and current. This
product of the lamp voltage and current. This product
must be multiplied by the apparent power factor
(approximately 0.8) to determine the true wattage. At
high frequency (>10Khz) the power factor is unity (one
and the wattage is obtained as the product of voltage
and current.
|
|
|
Ster-L-Ray™
is a
trademark of the
Atlantic Ultraviolet
Corp. |
|
|
 |